Note: These instructions based on a finished height for 2-3 years olds. It may be necessary to adjust the length of the (leg) pipes for a younger or older child.
Materials Needed:
1. Cut the PVC pipe to lengths indicated below.
3. Drill a 1 hole 3" from each end of
the 6 x 1 1/4 pipes. (Drill through only
one side.)
5. Put the elbows on the ends of the 14 1/2 x 1 1/4 pipes. 6. Lay pipes flat on the table. 7. Insert the 6 x 1 1/4 pipes into the elbows. 8. Position the holes upward. 9. Insert the tees on the end of the 6
x 1 1/4 pipes. (The unit should lay flat on the table with the
10. Set one unit aside. 11. Insert the 21 1/2 x 1 1/4 pipe into one tee. (The holes drilled in the pipe must face inward.) 12. Set the 17 3/8 x 3/4 pipes into the 1 holes
drilled in the 21 1/2 x 1 1/4 pipe. (It may be
13. Insert the other 21 1/2 x 1 1/4 pipe onto the 2 - 17 3/8 x 3/4 pipes. 14. Insert the 21 1/2 x 1 1/4 pipe into the open tee. 15. Insert the 24 1/8 x 3/4 pipes into the holes on the 6 x 1 1/4 pipes 16. Take the pipe unit that was set aside and insert the tees and holes onto the unit on the table. 17. Turn the piping upside down, resting on the elbows. 18. Screw the 17 3/8 x 3/4 pipe to the 21 1/2
x 1 1/4 pipe at the joint. This will add stability.
19. Insert the 14 x 1 1/4 pipes into the tees making the legs of the table. 20. Put the caps on the ends of the 14 x 1 1/4 pipes. 21. Turn over and insert the plastic container. |